skip to Main Content

Guide to installation

Before installing it

You should know this!
Grupo 49

Improper storage will void any warranty due to damage by direct sunlight or not being able to breath in a confined location.

Grupo 50

If EZ Liner has been packaged and shipped on a skid, cut all straps and loosen any 2 x 4 so the material is not restricted from expansion in a confined environment.

Grupo 51

All material should be climatized for 24 hours in the installation location to a minimum of 40 degrees fahrenheit (5 degrees celcius) prior to installation.

Grupo 52

All radiant heat must be at a minimum 18” (450mm) clearance from surface of EZ Liner.

Grupo 53

Provide a clearance at either end horizontally of ¼” (6mm) for the ceiling. Provide a clearance of ½” (12mm) vertically at the top of the wall.

Before installing it

You should know this!
Grupo 49

Improper storage will void any warranty due to damage by direct sunlight or not being able to breath in a confined location.

Grupo 50

If EZ Liner has been packaged and shipped on a skid, cut all straps and loosen any 2 x 4 so the material is not restricted from expansion in a confined environment.

Grupo 51

All material should be climatized for 24 hours in the installation location to a minimum of 40 degrees fahrenheit (5 degrees celcius) prior to installation.

Grupo 52

All radiant heat must be at a minimum 18” (450mm) clearance from surface of EZ Liner.

Grupo 53

Provide a clearance at either end horizontally of ¼” (6mm) for the ceiling. Provide a clearance of ½” (12mm) vertically at the top of the wall.

Types of installation

Types of installation

ceilings

Ceilings

walls

Walls

Recommended Tools

Battery Drill
Battery Drill
Square & Straight Edge
Square & Straight
Edge
Chalk Line
Chalk Line
Box Cutter
Box Cutter
Ladders-Scaffolding
Ladders/
Scaffolding
Rubber Mallet
Rubber Mallet
Rotary Hammer Drill
Rotary Hammer
Drill
Drill C-W Hole Saws
Drill c/w Hole
Saws
Caulking Gun
Caulking Gun
Tape Measure
Tape Measure
Circular Saw With Fine Tooth Blade
Circular Saw with
Fine Tooth Blade

Recommended Tools

Battery Drill
Battery Drill
Square & Straight Edge
Square & Straight Edge
Chalk Line
Chalk Line
Box Cutter
Box Cutter
Ladders-Scaffolding
Ladders/Scaffolding
Rubber Mallet
Rubber Mallet
Battery Drill
Rotary Hammer Drill
Drill C-W Hole Saws
Drill c/w Hole Saws
Caulking Gun
Caulking Gun
Tape Measure
Tape Measure
Circular Saw With Fine Tooth Blade
Circular Saw with Fine Tooth Blade